1,000 W · 50 Ah
ECO SLIM
Zeliox ECO SLIM combines battery and inverter functions in a compact vehicle power system.
- Continuous
- 1,000 W
- Capacity
- 0.6 kWh
- RRP
- $3,275
RRP, GST inclusive. Fleet pricing available.
2-Hour Install vs
Full Day Vehicle Outage
Most ute power system installations eat a full day of labour and can cost over AUD $1,000 in fit charges before your vehicle even turns a wheel.
Zeliox all-in-one systems install in about 2 hours with a single compact unit that replaces six or more separate components.
Complex Installs Cost Work Time
Installing separate batteries, DC-DC chargers, inverters, solar regulators, fuses, and wiring means paying an auto electrician for a full day’s work. Every hour the ute sits in a workshop is an hour it is not earning.
- Labour Cost
- AUD $1,000+
- Install Time
- 8–10 hours
- Separate Parts
- 6+ components
- Specialist Labour
- Auto electrician
- Downtime
- Full day
All-in-One Power, Fast Install
Zeliox combines inverter, battery, DC-DC charger, MPPT solar regulator, and monitoring into a single unit. The pre-integrated design removes complex component matching and reduces specialist labour.
- Install Time: About 2 hours
- Component Count: One compact unit
- Wiring Work: Pre-integrated system
- Monitoring: Bluetooth app
- Vehicle Swaps: Move between vehicles
- Downtime Cut: Up to 80%
Install faster. Start earning sooner.
Select your Zeliox
Our recommendation
2,000 W · 1.3 kWh
ECO II
The all-in-one energy system with battery, inverter and safety built in. Match expansion capacity to the vehicle's duty cycle, charging and installation requirements.
- Continuous
- 2,000 W
- Capacity
- 1.3 kWh
- Expands to
- 2.6 kWh
- RRP
- $6,470
RRP, GST inclusive. Fleet pricing available.
4,000 W • 8 kW Peak
NEO 4000: Summer Bundle
Professional Power. Zero Compromise. The NEO 4000 is more than a battery - it's a mobile power plant. 4,000 W continuous output, expandable to 9.6 kWh, with 4G fleet connectivity. European-engineered for Australian conditions. Available until 18 December, 2026. Act fast!
- Continuous
- 4,000 W
- Capacity
- 2.4 kWh
- Expands to
- 9.6 kWh
- RRP
- $9,888
RRP, GST inclusive. Fleet pricing available.
Why this one
Worth adding
ZCM6
Run and monitor six DC loads without filling the dash with separate switchgear. Configure each channel in the Zeliox app, use RF switch panels at the point of work, and add modules when the vehicle needs more outputs.
About ZCM6 →Zeliox systems are specified and fitted by trained installers.
Compare the range
Every figure below is the published specification for that system.
| Specification | ECO SLIM | ECO II | NEO 4000 |
|---|---|---|---|
| Continuous output | 1,000 W | 2,000 W | 4,000 W |
| Surge / peak | — | 4,000 W | 8,000 W |
| Capacity | 0.6 kWh | 1.3 kWh | 2.4 kWh |
| Expandable to | — | 2.6 kWh | 9.6 kWh |
| Mains (grid) charging | No | Yes | Yes |
| Solar (MPPT) charging | Yes | Yes | Yes |
| Onboard touchscreen | No | No | Yes |
| Remote monitoring (4G + app) | No | No | Yes |
| Heated for sub-zero starts | No | No | Yes |
| Installed weight | 19 kg | 35 kg | 43 kg |
Before & After Zeliox
Before Zeliox
After Zeliox
Full-day component installation
About 2-hour all-in-one install
Six or more separate parts
One integrated system
Complex wiring and matching
Factory-integrated power unit
Workshop downtime blocks jobs
Vehicle returns to work sooner
Hard to move between vehicles
Designed for easier transfer
Frequently asked questions
How long does installation take?
A prepared vehicle can typically receive a Zeliox all-in-one system in about 2 hours.
What does Zeliox replace?
It replaces separate battery, inverter, DC-DC charger, MPPT solar regulator, and monitoring components with one integrated system.
Start with what you need to power
Tell us what needs to run and for how long. We will help you work through the options.